BankLink InvoicePlus should be installed on computers running Windows 2000 ® or later.
To install BankLink InvoicePlus:
- Download the Software from our web site and unzip it.
- Click Start, Run and then select Setup.exe from the folder you unzipped into.
- You see the Select Your Country window.
Choose Australia from the drop down list and click OK
The BankLink InvoicePlus Setup Wizard displays the Welcome window
- Click Next to continue
You see the License Agreement window
- Select I accept the agreement and click Next to continue
You see the Select Destination Location window
- You can specify a drive and directory where BankLink InvoicePlus will be installed – we recommend you accept the default which is C:Program FilesBankLinkInvoicePlus, and click Next.
You see the Select Start Menu Folder window
- By default BankLinkInvoicePlus appears as the Start Menu Group, change it if required
- Click Next
BankLink InvoicePlus is added as a Start menu option accessible by clicking on Start, Programs, BankLink, InvoicePlus
You see the Ready to Install window confirming you are ready to install the BankLink InvoicePlus software
- Click Install to start installing the software
The BankLink InvoicePlus software installs, displaying progress
The Setup Wizard informs you when setup is complete
- Check that the Start InvoicePlus check box is enabled
- Click Finish to exit setup
You are prompted to register your software using the Registration code supplied by ATB Partners.
After installing BankLink InvoicePlus you will need to register and activate the InvoicePlus software. To do this you will need a Registration Key obtained from ATB Partners.
You have to be connected to the Internet to activate you software to we suggest you have an active session running before you continue.
1. Start InvoicePlus.
InvoicePlus displays the Registration Wizard window.
2. Type in your name and Registration Key (as supplied by ATB Partners)
3. Click Next.
InvoicePlus confirms your registration and prompts you to Activate Now or Activate Later
If you choose Activate Later, InvoicePlus starts and you can begin using it. You have 45 days from when the Registration Key was generated to activate the software, so the next time you start InvoicePlus you will be prompted again to Activate Now or Activate Later
4. Click Activate Now to activate InvoicePlus. InvoicePlus connects to the Internet and accesses a secure server to obtain an activation key. When activation is complete InvoicePlus displays a confirmation window telling you that activation was successful.
5. Click Finish to start using InvoicePlus
System Requirement:
- Windows 2000 ® or later
- PC with Pentium ® processor (or equivalent) @ 200MHz or better
- At least 128MB RAM
- Hard disk with at least 200MB free
- 16-bit colour, 1024x768 screen resolution
If you require any further assistance with the installation or use of BankLink Invoice Plus please contact ATB Partners.
® Pentium is a registered trademark of Intel Corporation or its subsidiaries in the United States and other countries
® Windows is a registered trademark of Microsoft Corporation in the United States and other countries.
